Star All In One DPSC (Drainpipe And Sewage Cleaner)

Directions for use

Sewage

Use neat for heavy duty situations or dilute up to 1:10 in clean water for less demanding applications. Use any diluted product right away.

Pipe cleaning

Maintenance dosing will keep sinks, scuppers and waste food disposal units clean, clear and odour-free. A liquid solution should be prepared by adding one solupac to 10 litres of hand hot (35°C) if fresh water and left for 15 minutes (stirring periodically) for the bacteria to activate.

Initial doses of 0.5 litres of this solution should be applied into sinks, scuppers, drains, waste food disposal units, etc. A maintenance dose once or twice a week can then be applied to keep the pipes in clean condition.

Harsh toxic cleaners (acids, caustics, disinfectants) should not be used as these will kill off the bacterial action in the pipes.

Before plumbing work for pipe modification or retrofits, pipes can be cleaned by isolating the system and filling pipes with the solution for up to 48 hours before draining. If necessary, further applications should be made until drains run clean.

Holding tanks

Organic wastes can be kept liquid and pumpable. Tanks can be cleaned without manual entry and without the use of harsh toxic cleaning chemicals. Prepare a solution of one solupac to ten litres of hand hot (35°C) freshwater and left for 15 minutes (stirring periodically) before dosing into the holding tank once or twice a week. The dose rates should be approximately one solupac per 1000 litres of waste in the tank.

Note: Severely scaled systems should be acid cleaned.

Handling

Handle under good housekeeping practices. Wash hands after use. Keep away from drinking water sources. Store in a cool, dry place.

Please read the Material Safety Data Sheet before using this product for detailed information on safety and health.